› RC AIRCRAFT › FLYING › Flying @ “The Field” › Flying @ The Field 2024 › Friday Fly-In
Tagged: Friday 12-1-24, Thermalling Day
- This topic has 7 replies, 3 voices, and was last updated January 13, 2024 at 8:42 am by
Kermit.
-
AuthorPosts
-
-
12 January 2024 at 16:43 #15817
Well Stephen certainly proved his worth today as the new Weather Guru as today was almost perfect, temperature in the mid 20’s and little wind to speak of till after lunch when the Sea Breeze came in with a vengeance.
And, Stephen also mastered the Calendar function on the website so we will be looking forward to more of the same.
We had Kermit, Stephen, Mike, Andrew, Gerald & Ricky all flying today.
Ricky has recently purchased a 3D printer and brought along his first model off his printer for Show & Tell
It needs a close eye to pick it has been entirely 3D printed.
Ricky has been a Master Modeller for many years & 3D printing will no doubt be another avenue for him.
Andrew & I flew our gliders for a bit of thermalling & it wasn’t long before Ricky joined in with his Bix 3, thermalling on high with the rest of us.
Gerald flew the Eyas Eagle but I’m not sure what else.
I had the Draco out for a bit of parachute jumping and also flew the Wild Wing & the Blanik.
Kermit was mainly flying his Bix 3 and practising his goal post flying, he had other planes but I’m not sure what flew other than his Radian Glider that came down harder than it went up.
He also presented his customary BBQ lunch (and cakes) and a welcome sunshade to sit under, thanks my little froggy friend.
Stephen was still tinkering with his Gas powered Boomerang but also managed a few laps with his recently repaired (new motor shaft) Red Devil. Certainly sounds a lot quieter now without the horrendous motor vibration.
My one and only video from today is onboard the Blanik (RunCam2-4K is finally back and working) whilst thermalling from around 200m to over 400m then slowly descending as the thermals died out.
-
12 January 2024 at 20:05 #15818
-
12 January 2024 at 21:22 #15819
Well done Stephen for the weather,
A nice scenic video from Mike,
And Kermit, what a great video, excellent work as usual by your relief cameraman and you posted it on the same day!
Great barbecue and shelter as well…………………Just Sayn
I was a bit disappointed with Wicky, all that loose dirt to play in with the bulldozer, but no action. (it must be only a showpiece)
-
12 January 2024 at 21:56 #15820
-
12 January 2024 at 22:02 #15821
DEAR MR SINKER SIR, IT would be in your best interest not to mess with wicky he may be tiny …..like very tiny but this boy has been known to suck all the flesh from a cray fish through its tentacles……. alive ..one of his many talents so be warned Do not mess with wicky ……………………………………………………………………………………..just sayn
-
13 January 2024 at 08:32 #15828
Kermit, Thanks for the warning about
littletiny Wicky, looks like I will have to go back to picking on you! We all know frogs are harmless……………..Just Sayn
-
-
12 January 2024 at 22:05 #15822
oh dear I forgot to mention hangy for his ..ha ha ha..camera work ………. narh cant do it
-
13 January 2024 at 08:42 #15829
yeah ..no..yeah… just lookin after ya cobber mate… bring it on ……………………………………………………….just sayn
-
-
AuthorPosts
- You must be logged in to reply to this topic.