RC AIRCRAFT BUILDS Electric Powered E-flite Pulse XT25e kit build Reply To: E-flite Pulse XT25e kit build

#7520

Installed the ZOHD RTH/stabiliser today and finished programming the radio with all the recommended throws etc. The COG is very close to to recommended with a 3000mAh 3s LiPo hard forward against the firewall but I may need to add just a tad of weight in the nose.

Note: after a couple of flights the flight battery has been moved back around 35 – 40mm from the firewall. It was a tad nose heavy with the first setup.

The Pulse XT 25e is ready to take to the skies.